STANDARD TILE DIMENSIONS
What Installers Say
“The Iron Woods Adjustable Self-Leveling Pedestal saves us 30 to 40% in installation labor because of the UNIQUE FEATURES that no other pedestal has!
“Very easy to install. No need to rent a crane for our roof deck project as everything we needed fit into the elevator!”
Is proper ventilation a challenge for your decking project? Iron Woods deck tile and pedestal system was built for this moment.
COST-EFFECTIVE ALTERNATIVE TO TRADITIONAL DECKING
Looking for a more budget-friendly decking solution? The Iron Woods System provides a simple, high-value alternative.
Iron Woods Deck Tiles and Pedestal Systems provide a unique solution for the conversion of city streets (for pedestrian use only), Urban Boardwalks, StreetScapes, and Street Decks. The systems offer a temporary or permanent solution for a variety of functional design needs.
SMOOTH DECKING SURFACE
Iron Woods® Ipe Deck Tiles are made with a smooth deck board surface to maximize shoe-to-surface area contact. Additionally, smooth decking is easier to clean and reduces fungi growth, which can further increase slip resistance.
Features & Benefits
Why Iron Woods® Deck Tiles?
WHICH IS RIGHT FOR YOU?
Iron Woods offers several pedestal options based on surface and elevation requirements. Iron Woods pedestals can be utilized for projects that require roof-to-deck surface tile elevation heights from 1-3/4” up to 36” and loads up to 2000lbs per pedestal.
NEED TO KNOW
Deck Tile Specifications
SELF-LEVELING SCREW JACK PEDESTAL SYSTEM WITH ETERNO™ TECHNOLOGY
Looking for a simple solution? Iron Woods® Self Leveling Pedestals with built-in slope compensation is right for you. Combining supporting base, extension, screw and head options, the system generates pedestal heights from 1.25” to 21.75” and slopes from 5/32’’ to ½’’ (0% to 5%) per foot of slope. Pedestals are placed on a 24” square grid.
COEFFICIENT OF FRICTION RATINGS
Iron Woods® Ipe Deck Tiles are offered with a smooth deck board surface only. Grooved decking surfaces are not recommended. Why? Grooved surfaces reduce surface area contact with a shoe and are more difficult to clean supporting the collection of food and dirt which encourages fungi growth further reducing slip resistance.
*While Iron Woods Deck Tiles meet minimum International Building Code Compliance Standards, this is not a warranty of safety.
CONVENTIONAL DECK HEAD
Elevations™ pedestal systems support conventional deck construction as well as deck tiles. The unique conventional deck head is designed to allow for the attachment of stringers. A simple application of Iron Woods 2×4 Ipe stringers (laid flat) and one of Iron Woods 5/4×4 Ipe decking options, provides a traditional deck appearance and increases the deck live load rating to 275 psf. As a ‘Best Practice’ Iron Woods recommends the use of 5/4×4 deck profiles (S4S E4E, Traditional Slotted) where ventilation is limited or poor.
STAR PEDESTAL SYSTEM WITH ETERNO™ TECHNOLOGY
When your project requires pedestals under 1-1/4”, choose Iron Woods® New Star Pedestal System. The Star Pedestal System incorporates pressure fit connection technology but not self–leveling technology.
For times when you need to follow the natural contour of the roof, choose EPDM Rubber Pedestal. The 1/4” fixed-height pedestal incorporates spacer tabs and pressure fit connector technology.
THE DECK SYSTEM
Unique features no other system has
Whether you’re dealing with poor underdeck ventilation, sloped surfaces, ineffective draining or any other building challenge, the Iron Woods Deck Tile and Pedestal System can help. Developed to provide a stable wood deck surface for any deck construction with poor good ventilation, Iron Woods Decking System offers a unique and cost effective solution.